Como crear un grupo de programas:

Muy útil para crear instalaciones por ejemplo:

Añadir un textbox y hacerlo oculto.
Una vez oculto, escribir estas líneas sustituyendo "Nombre del Grupo" por que que se desea crear,
y que lo colocamos en Inicio -> Programas.
Private Sub Command1_Click()
    Text1.LinkTopic = "Progman|Progman"
    Text1.LinkMode = 2
    Text1.LinkExecute "[CreateGroup(" + "Nombre del Grupo" + ")]"
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Vaciar la carpeta de Documentos de Windows:


Inicie un nuevo proyecto y añada el siguiente código:
Private Declare Function SHAddToRecentDocs Lib "Shell32" 
(ByVal lFlags As Long, ByVal lPv As Long) As Long

Private Sub Form_Load()
    SHAddToRecentDocs 0, 0
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Abrir la ventana de Propiedades de agregar o quitar aplicaciones:

Añada el siguiente código:
Private Sub Command1_Click()
X = Shell("Rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl @0")
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Uso de Random:

La función Rnd o Random posee la virtud de obtener números aleatorios entre 0 y 1:

El único inconveniente a la hora de usar Rnd, es que hay que inicializarlo, en otro caso,
el resultado de la función Rnd, será siempre el mismo dentro de un determinado ordenador.
Por ejemplo, el código:

Private Sub Form_Load()
  Dim Num As Double
  Num = Rnd
  MsgBox Num
End Sub
Nos daría como resultado siempre el mismo número.

Para solucionar este problema, debemos escribir la sentencia Randomize antes de llamar
a la función Rnd. De esta manera, la función Rnd actuará correctamente.

El código quedaría así:

Private Sub Form_Load()
  Dim Num As Double
  Randomize
  Num = Rnd
  MsgBox Num
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular la etiqueta o label de un disco duro:

Hallar la etiqueta o label del mismo disco duro:

Escribir el siguiente código:
Private Declare Function GetVolumeInformation& Lib "kernel32" Alias 
"GetVolumeInformationA" (ByVal lpRootPathName As String, 
ByVal pVolumeNameBuffer As String, ByVal nVolumeNameSize As Long, 
lpVolumeSerialNumber As Long, lpMaximumComponentLength As Long, 
lpFileSystemFlags As Long, ByVal lpFileSystemNameBuffer As String, 
ByVal nFileSystemNameSize As Long)

Private Sub Form_Load()
  Dim cad1 As String * 256
  Dim cad2 As String * 256
  Dim numSerie As Long
  Dim longitud As Long
  Dim flag As Long
  unidad = "D:\"
  Call GetVolumeInformation(unidad, cad1, 256, numSerie, longitud, 
  flag, cad2, 256)
  MsgBox "Label de la unidad " & unidad & " = " & cad1
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Imprimir un RichTextBox tal y como se ve:

Imprimir un RichTextBox con su formato original.
Private Sub Command1_Click()
On Error GoTo ErrorDeImpresion
Printer.Print ""
RichTextBox1.SelPrint Printer.hDC
Printer.EndDoc
Exit Sub
ErrorDeImpresion:
Exit Sub
End Sub
Otra forma:

En el Formulario [Form1 por defecto] :
Private Sub Form_Load() 
     Dim LineWidth As Long
     Me.Caption = "Rich Text Box Ejemplo de Impresion"
     Command1.Move 10, 10, 600, 380
     Command1.Caption = "&Imprimir"
     RichTextBox1.SelFontName = "Verdana, Tahoma, Arial"
     RichTextBox1.SelFontSize = 10
     LineWidth = WYSIWYG_RTF(RichTextBox1, 1440, 1440)
     Me.Width = LineWidth + 200
End Sub 

Private Sub Form_Resize() 
     RichTextBox1.Move 100, 500, Me.ScaleWidth - 200, Me.ScaleHeight - 600
End Sub 

Private Sub Command1_Click() 
     PrintRTF RichTextBox1, 1440, 1440, 1440, 1440
End Sub 

Crear un módulo y escribir:

Private Type Rect
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type

Private Type CharRange
cpMin As Long
cpMax As Long
End Type

Private Type FormatRange
hdc As Long
hdcTarget As Long
rc As Rect
rcPage As Rect
chrg As CharRange
End Type

Private Const WM_USER As Long = &H400
Private Const EM_FORMATRANGE As Long = WM_USER + 57
Private Const EM_SETTARGETDEVICE As Long = WM_USER + 72
Private Const PHYSICALOFFSETX As Long = 112
Private Const PHYSICALOFFSETY As Long = 113
Private Declare Function GetDeviceCaps Lib "gdi32" ( _
ByVal hdc As Long, ByVal nIndex As Long) As Long
Private Declare Function SendMessage Lib "USER32" Alias "SendMessageA" _
(ByVal hWnd As Long, ByVal msg As Long, ByVal wp As Long, lp As Any) As Long
Private Declare Function CreateDC Lib "gdi32" Alias "CreateDCA" _
(ByVal lpDriverName As String, ByVal lpDeviceName As String, _
ByVal lpOutput As Long, ByVal lpInitData As Long) As Long

Public Function WYSIWYG_RTF(RTF As RichTextBox, LeftMarginWidth As Long, _
RightMarginWidth As Long) As Long
Dim LeftOffset As Long, LeftMargin As Long, RightMargin As Long
Dim LineWidth As Long
Dim PrinterhDC As Long
Dim r As Long
Printer.Print Space(1)
Printer.ScaleMode = vbTwips
LeftOffset = Printer.ScaleX(GetDeviceCaps(Printer.hdc, _
PHYSICALOFFSETX), vbPixels, vbTwips)
LeftMargin = LeftMarginWidth - LeftOffset
RightMargin = (Printer.Width - RightMarginWidth) - LeftOffset
LineWidth = RightMargin - LeftMargin
PrinterhDC = CreateDC(Printer.DriverName, Printer.DeviceName, 0, 0)
r = SendMessage(RTF.hWnd, EM_SETTARGETDEVICE, PrinterhDC, _
ByVal LineWidth)
Printer.KillDoc
WYSIWYG_RTF = LineWidth
End Function

Public Sub PrintRTF(RTF As RichTextBox, LeftMarginWidth As Long, _
TopMarginHeight, RightMarginWidth, BottomMarginHeight)
Dim LeftOffset As Long, TopOffset As Long
Dim LeftMargin As Long, TopMargin As Long
Dim RightMargin As Long, BottomMargin As Long
Dim fr As FormatRange
Dim rcDrawTo As Rect
Dim rcPage As Rect
Dim TextLength As Long
Dim NextCharPosition As Long
Dim r As Long
Printer.Print Space(1)
Printer.ScaleMode = vbTwips
LeftOffset = Printer.ScaleX(GetDeviceCaps(Printer.hdc, _
PHYSICALOFFSETX), vbPixels, vbTwips)
TopOffset = Printer.ScaleY(GetDeviceCaps(Printer.hdc, _
PHYSICALOFFSETY), vbPixels, vbTwips)
LeftMargin = LeftMarginWidth - LeftOffset
TopMargin = TopMarginHeight - TopOffset
RightMargin = (Printer.Width - RightMarginWidth) - LeftOffset
BottomMargin = (Printer.Height - BottomMarginHeight) - TopOffset
rcPage.Left = 0
rcPage.Top = 0
rcPage.Right = Printer.ScaleWidth
rcPage.Bottom = Printer.ScaleHeight
rcDrawTo.Left = LeftMargin
rcDrawTo.Top = TopMargin
rcDrawTo.Right = RightMargin
rcDrawTo.Bottom = BottomMargin
fr.hdc = Printer.hdc
fr.hdcTarget = Printer.hdc
fr.rc = rcDrawTo
fr.rcPage = rcPage
fr.chrg.cpMin = 0
fr.chrg.cpMax = -1
TextLength = Len(RTF.Text)
Do
NextCharPosition = SendMessage(RTF.hWnd, EM_FORMATRANGE, True, fr)
If NextCharPosition >= TextLength Then Exit Do
fr.chrg.cpMin = NextCharPosition
Printer.NewPage
Printer.Print Space(1)
fr.hDC = Printer.hDC
fr.hDCTarget = Printer.hDC
Loop
Printer.EndDoc
r = SendMessage(RTF.hWnd, EM_FORMATRANGE, False, ByVal CLng(0))
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Como obtener el directorio desde donde estamos ejecutando nuestro programa:

Escribir el siguiente código:
Private Sub Form_Load()
Dim Directorio as String
ChDir App.Path
ChDrive App.Path
Directorio = App.Path
If Len(Directorio) > 3 Then
Directorio = Directorio & "\"
End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Determinar si un fichero existe o no:

Escriba el siguiente código: (una de tanta maneras aparte de Dir$())
Private Sub Form_Load()
On Error GoTo Fallo
x = GetAttr("C:\Autoexec.bat")
MsgBox "El fichero existe."
Exit Sub
Fallo:
MsgBox "El fichero no existe."
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Capturar la pantalla entera o la ventana activa:

Añadir dos botones y escribir el siguiente código:
Private Declare Sub keybd_event Lib "user32" (ByVal bVk As Byte,
ByVal bScan As Byte, ByVal dwFlags As Long,
ByVal dwExtraInfo As Long)

Private Sub Command1_Click()
'Captura la ventana activa
keybd_event 44, 0, 0&, 0&
End Sub

Private Sub Command2_Click()
'Captura toda la pantalla
keybd_event 44, 1, 0&, 0&
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Salvar el contenido de un TextBox a un fichero en disco:

Añada el siguiente código:
Private Sub Command1_Click()
Dim canalLibre As Integer
'Obtenemos un canal libre que nos dará
'el sistema oparativo para poder operar
canalLibre = FreeFile
'Abrimos el fichero en el canal dado
Open "C:\fichero.txt" For Output As #canalLibre
'Escribimos el contenido del TextBox al fichero
Print #canalLibre, Text1
Close #canalLibre
End Sub
Nuevo



Código:
Dim foo As Integer

foo = FreeFile
Open "C:\Archivo.txt" For Input As #foo
Text1.Text = Input(LOF(foo), #foo)
Close #foo
Para guardar:

Código:
Dim foo As Integer

foo = FreeFile
Open "C:\Archivo.txt" For Output As #foo
Print #foo, Text1.Text
Close #foo
dialogos:

Ese es para Abrir

Código:
Dim strOpen As String
CommonDialog1.ShowOpen
strOpen = CommonDialog1.FileName
Text1.LoadFile strOpen
Text1.LoadFile strClose
Ese para guardar

Código:
Dim strNewFile As String
CommonDialog1.ShowSave
strNewFile = CommonDialog1.FileName
Text1.SaveFile strNewFile
---------------------------------------------------------------------------------------------------------------------------------------------
Como desplegar la lista de un ComboBox automáticamente:


Insertar un ComboBox y un Botón en un nuevo proyecto y escribir el siguiente código:
Private Declare Function SendMessageLong Lib "user32" Alias
"SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long,
ByVal wParam As Long, ByVal lParam As Long) As Long

Private Sub Form_Load()
Combo1.Clear
Combo1.AddItem "Objeto 1"
Combo1.AddItem "Objeto 2"
Combo1.AddItem "Objeto 3"
Combo1.AddItem "Objeto 4"
Combo1.AddItem "Objeto 5"
Combo1.AddItem "Objeto 6"
Combo1.AddItem "Objeto 7"
Combo1.Text = "Objeto 1"
End Sub

Private Sub Command1_Click()
'ComboBox desplegado
Dim Resp As Long
Resp = SendMessageLong(Combo1.hwnd, &H14F, True, 0)
End Sub
Nota: Resp = SendMessageLong(Combo1.hwnd, &H14F, False, 0) oculta la lista desplegada
de un ComboBox, aunque esto sucede también cuando cambiamos el focus a otro control o al formulario.

---------------------------------------------------------------------------------------------------------------------------------------------
Selección y eliminación de todos los elementos de un ListBox:

Insertar un ListBox y dos Botón en un nuevo proyecto. Poner la propiedad MultiSelect del ListBox
a "1 - Simple" y escriba el siguiente código:
Private Declare Function SendMessageLong Lib "user32" Alias
"SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long,
ByVal wParam As Long, ByVal lParam As Long) As Long

Private Sub Form_Load()
List1.AddItem "Texto 1"
List1.AddItem "Texto 2"
List1.AddItem "Texto 3"
List1.AddItem "Texto 4"
List1.AddItem "Texto 5"
List1.AddItem "Texto 6"
List1.AddItem "Texto 7"
End Sub

Private Sub Command1_Click()
'Seleccion de todo el contenido
Dim Resp As Long
Resp = SendMessageLong(List1.hwnd, &H185&, True, -1)
End Sub

Private Sub Command2_Click()
'Eliminacion de todos los elementos seleccionados
Dim Resp As Long
Resp = SendMessageLong(List1.hwnd, &H185&, False, -1)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular el tamaño de fuentes de letra:

Es útil para utilizar con la propiedad Resize sobre los controles al cambiar de resolución de pantalla.
Escribir el siguiente código:
Private Declare Function GetDeviceCaps Lib "gdi32" (ByVal
hdc As Long, ByVal nIndex As Long) As Long
Private Declare Function GetDC Lib "user32" (ByVal hwnd
As Long) As Long
Private Declare Function GetDesktopWindow Lib "user32" ()
As Long

Private Sub Form_Load()
Dim ObCaps As Long
Dim ObDC As Long
Dim ObDesktop As Long
Dim Cad As String
ObDesktop = GetDesktopWindow()
ObDC = GetDC(ObDesktop)
ObCaps = GetDeviceCaps(ObDC, 88)
If ObCaps = 96 Then Cad = "Pequeñas
If ObCaps = 120 Then Cad = "Grandes"
MsgBox "Fuentes de letra " & Cad
End Sub
*) Esta función ha sido corregida por un error en las etiquetas, 96 corresponde a pequeñas
y 120 a Grandes, agradecimientos a Andrés Moral Gutiérrez por su correción (01/06/1998)

---------------------------------------------------------------------------------------------------------------------------------------------
Provocar la trasparencia de un formulario:

Escribir el siguiente código:
Private Declare Function SetWindowLong Lib "user32" Alias
"SetWindowLongA" (ByVal hwnd As Long, ByVal nIndex As Long,
ByVal dwNewLong As Long) As Long

Private Sub Form_Load()
Dim Resp As Long
Resp = SetWindowLong(Me.hwnd, -20, &H20&)
Form1.Refresh
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Pasar de un TextBox a otro al pulsar Enter:

Insertar tres TextBox y escribir el siguiente código:
Private Sub Text1_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
SendKeys "{tab}"
KeyAscii = 0
End If
End Sub

Private Sub Text2_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
SendKeys "{tab}"
KeyAscii = 0
End If
End Sub

Private Sub Text3_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
SendKeys "{tab}"
KeyAscii = 0
End If
End Sub
otra forma:

Insertar tres TextBox, cambiar la propiedad KeyPreview del formulario a True y escribir el siguiente código:
Private Sub Form_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
SendKeys "{tab}"
KeyAscii = 0
End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Usar IF THEN ELSE ENDIF en una misma línea:


Insertar un CommandButton y un TextBox y escribir el siguiente código:
Private Sub Command1_Click()
Dim I As Integer
Dim A As String
I = 3
A = IIf(I <> 1, "True", "False")
Text1.Text = A
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Convertir un texto a mayúsculas o minúsculas:

Crear un formulario y situar un TextBox. Escribir:
Private Sub Text1_Change()
Dim I As Integer
Text1.Text = UCase(Text1.Text)
I = Len(Text1.Text)
Text1.SelStart = I
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Presentar la ventana AboutBox (Acerca de) por defecto:

Escribir el siguiente código en el formulario:
Private Declare Function ShellAbout Lib "shell32.dll" Alias
"ShellAboutA" (ByVal hwnd As Long, ByVal szApp As String,
ByVal szOtherStuff As String, ByVal hIcon As Long) As Long

Private Sub Command1_Click()
Call ShellAbout(Me.hwnd, "Título Programa", "Copyright 1997, Dueño de la aplicación", Me.Icon)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Incrementar un menú en ejecución:

Abrir un proyecto nuevo, y haga doble click sobre el formulario. Meidante el gestór de menús
escribir lo siguiente:


Caption -> Editor
Name -> MnuEditor
Pulse Insertar y el botón "->"
Caption -> Añadir
Name -> MnuAñadir
Pulse Insertar
Caption -> Quitar
Name -> MnuQuitar
Enabled -> False
Pulse Insertar
Caption -> Salir
Name -> MnuSalir
Pulse Insertar
Caption -> -
Name -> MnuIndex
Index -> 0
Pulse Aceptar

Escribir el siguiente código en el formulario:
Private ultElem As Integer

Private Sub Form_Load()
ultElem = 0
End Sub

Private Sub MnuQuitar_Click()
Unload MnuIndex(ultElem)
ultElem = ultElem - 1
If ultElem = 0 Then
MnuQuitar.Enabled = False
End If
End Sub

Private Sub MnuSalir_Click()
End
End Sub

Private Sub MnuAñadir_Click()
ultElem = ultElem + 1
Load MnuIndex(ultElem)
MnuIndex(ultElem).Caption = "Menu -> " + Str(ultElem)
MnuQuitar.Enabled = True
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Cambiar el fondo de Windows desde Visual Basic:

Crear un formulario y escribir:
Private Declare Function SystemParametersInfo Lib "user32" Alias
"SystemParametersInfoA" (ByVal uAction As Long, ByVal uParam As
Long, ByVal lpvParam As Any, ByVal fuWinIni As Long) As Long

Private Sub Form_Load()
Dim fallo As Integer
fallo = SystemParametersInfo(20, 0, "C:\WINDOWS\FONDO.BMP", 0)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular el número de colores de video del modo actual de Windows:

Crear un formulario y un TextBox y escribir:
Private Declare Function GetDeviceCaps Lib "gdi32"
(ByVal hdc As Long, ByVal nIndex As Long) As Long

Private Sub Form_Load()
i = (2 ^ GetDeviceCaps(Form1.hdc, 12)) ^
GetDeviceCaps(Form1.hdc, 14)
Text1.Text = CStr(i) & " colores."
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Ajustar un Bitmap a la pantalla:


Crear un formulario con un BitMap cualquiera y una etiqueta o Label con los atributos que quiera.

Escribir lo siguiente:
Private Sub Form_Paint()
Dim i As Integer
For i = 0 To Form1.ScaleHeight Step Picture1.Height
For j = 0 To Form1.ScaleWidth Step Picture1.Width
PaintPicture Picture1, j, i, Picture1.Width,
Picture1.Height
Next
Next
End Sub

Private Sub Form_Resize()
Picture1.Left = -(Picture1.Width + 200)
Picture1.Top = -(Picture1.Height + 200)
Label1.Top = 100
Label1.Left = 100
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Detectar la unidad del CD-ROM:

Si para instalar una aplicación o ejecutar un determinado software necesitas saber si existe el CD-ROM:.

Crear un formulario con una etiqueta y escribir lo siguiente:
Option Explicit

Private Declare Function GetDriveType Lib "kernel32" Alias
"GetDriveTypeA" (ByVal nDrive As String) As Long
Private Declare Function GetLogicalDriveStrings Lib "kernel32" Alias
"GetLogicalDriveStringsA" (ByVal nBufferLength As Long, ByVal
lpBuffer As String) As Long
Private Const DRIVE_REMOVABLE = 2
Private Const DRIVE_FIXED = 3
Private Const DRIVE_REMOTE = 4
Private Const DRIVE_CDROM = 5
Private Const DRIVE_RAMDISK = 6

Function StripNulls(startStrg$) As String
Dim c%, item$
c% = 1
Do
If Mid$(startStrg$, c%, 1) = Chr$(0) Then
item$ = Mid$(startStrg$, 1, c% - 1)
startStrg$ = Mid$(startStrg$, c% + 1, Len(startStrg$))
StripNulls$ = item$
Exit Function
End If
c% = c% + 1
Loop
End Function

Private Sub Form_Load()
Dim r&, allDrives$, JustOneDrive$, pos%, DriveType&
Dim CDfound As Integer
allDrives$ = Space$(64)
r& = GetLogicalDriveStrings(Len(allDrives$), allDrives$)
allDrives$ = Left$(allDrives$, r&)
Do
pos% = InStr(allDrives$, Chr$(0))
If pos% Then
JustOneDrive$ = Left$(allDrives$, pos%)
allDrives$ = Mid$(allDrives$, pos% + 1, Len(allDrives$))
DriveType& = GetDriveType(JustOneDrive$)
If DriveType& = DRIVE_CDROM Then
CDfound% = True
Exit Do
End If
End If
Loop Until allDrives$ = "" Or DriveType& = DRIVE_CDROM
If CDfound% Then
label1.Caption = "La unidad de CD-ROM corresponde a la
unidad: " & UCase$(JustOneDrive$)
Else
label1.Caption = "Su sistema no posee CD-ROM o unidad
no encontrada."
End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular la profundidad de color (bits por pixel) y resolución de Windows:

Crear un formulario y un TextBox y escribir:
Private Declare Function GetDeviceCaps Lib "gdi32"
(ByVal hdc As Long, ByVal nIndex As Long) As Long

Private Sub Form_Load()
Dim col, bit, largo, alto As Integer
col = GetDeviceCaps(Form1.hdc, 12)
If col = 1 Then
bit = GetDeviceCaps(Form1.hdc, 14)
If bit = 1 Then
Text1.Text = "Resolucion de 1 bit / 2 colores"
ElseIf bit = 4 Then
Text1.Text = "Resolucion de 4 bits / 16 colores"
End If
ElseIf col = 8 Then
Text1.Text = "Resolucion de 8 bits / 256 colores"
ElseIf col = 16 Then
Text1.Text = "Resolucion de 16 bits / 65000 colores"
Else
Text1.Text = "Resolucion de 16 M colores"
End If
largo = GetDeviceCaps(Form1.hdc, 8)
alto = GetDeviceCaps(Form1.hdc, 10)
Text1.Text = Text1.Text & " " & largo & "x" & alto & " pixels"
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Comprobar si el sistema posee tarjeta de sonido:

Crear un formulario y escribir:
Private Declare Function waveOutGetNumDevs Lib
"winmm.dll" () As Long

Private Sub Form_Load()
Dim inf As Integer
inf = waveOutGetNumDevs()
If inf > 0 Then
MsgBox "Tarjeta de sonido soportada.", vbInformation,
"Informacion: Tarjeta de sonido"
Else
MsgBox "Tarjeta de sonido no soportada.", vbInformation,
"Informacion: Tarjeta de sonido"
End If
End
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Crear una ventana con la Información del Sistema:

Crear un formulario e insertar un módulo y escribir en el formulario lo siguiente:
Private Sub Form_Load()
Dim msg As String
MousePointer = 11
Dim verinfo As OSVERSIONINFO
verinfo.dwOSVersionInfoSize = Len(verinfo)
ret% = GetVersionEx(verinfo)
If ret% = 0 Then
MsgBox "Error Obteniendo Information de la Version"
End
End If
Select Case verinfo.dwPlatformId
Case 0
msg = msg + "Windows 32s "
Case 1
msg = msg + "Windows 95 "
Case 2
msg = msg + "Windows NT "
End Select
ver_major$ = verinfo.dwMajorVersion
ver_minor$ = verinfo.dwMinorVersion
build$ = verinfo.dwBuildNumber
msg = msg + ver_major$ + "." + ver_minor$
msg = msg + " (Construido " + build$ + ")" + vbCrLf + vbCrLf
Dim sysinfo As SYSTEM_INFO
GetSystemInfo sysinfo
msg = msg + "CPU: "
Select Case sysinfo.dwProcessorType
Case PROCESSOR_INTEL_386
msg = msg + "Procesador Intel 386 o compatible." + vbCrLf
Case PROCESSOR_INTEL_486
msg = msg + "Procesador Intel 486 o compatible." + vbCrLf
Case PROCESSOR_INTEL_PENTIUM
msg = msg + "Procesador Intel Pentium o compatible." + vbCrLf
Case PROCESSOR_MIPS_R4000
msg = msg + "Procesador MIPS R4000." + vbCrLf
Case PROCESSOR_ALPHA_21064
msg = msg + "Procesador DEC Alpha 21064." + vbCrLf
Case Else
msg = msg + "Procesador (desconocido)." + vbCrLf
End Select
msg = msg + vbCrLf
Dim memsts As MEMORYSTATUS
Dim memory&
GlobalMemoryStatus memsts
memory& = memsts.dwTotalPhys
msg = msg + "Memoria Fisica Total: "
msg = msg + Format$(memory& \ 1024, "###,###,###") + "Kb" + vbCrLf
memory& = memsts.dwAvailPhys
msg = msg + "Memoria Fisica Disponible: "
msg = msg + Format$(memory& \ 1024, "###,###,###") + "Kb" + vbCrLf
memory& = memsts.dwTotalVirtual
msg = msg + "Memoria Virtual Total: "
msg = msg + Format$(memory& \ 1024, "###,###,###") + "Kb" + vbCrLf
memory& = memsts.dwAvailVirtual
msg = msg + "Memoria Virtual Disponible: "
msg = msg + Format$(memory& \ 1024, "###,###,###") + "Kb" + vbCrLf + vbCrLf
MsgBox msg, 0, "Acerca del Sistema"
MousePointer = 0
End
End Sub
Escribir lo siguiente en el módulo:
Type SYSTEM_INFO
dwOemID As Long
dwPageSize As Long
lpMinimumApplicationAddress As Long
lpMaximumApplicationAddress As Long
dwActiveProcessorMask As Long
dwNumberOrfProcessors As Long
dwProcessorType As Long
dwAllocationGranularity As Long
dwReserved As Long
End Type

Type OSVERSIONINFO
dwOSVersionInfoSize As Long
dwMajorVersion As Long
dwMinorVersion As Long
dwBuildNumber As Long
dwPlatformId As Long
szCSDVersion As String * 128
End Type

Type MEMORYSTATUS
dwLength As Long
dwMemoryLoad As Long
dwTotalPhys As Long
dwAvailPhys As Long
dwTotalPageFile As Long
dwAvailPageFile As Long
dwTotalVirtual As Long
dwAvailVirtual As Long
End Type

Declare Function GetVersionEx Lib "kernel32"
Alias "GetVersionExA" (LpVersionInformation
As OSVERSIONINFO) As Long
Declare Sub GlobalMemoryStatus Lib "kernel32"
(lpBuffer As MEMORYSTATUS)
Declare Sub GetSystemInfo Lib "kernel32"
(lpSystemInfo As SYSTEM_INFO)

Public Const PROCESSOR_INTEL_386 = 386
Public Const PROCESSOR_INTEL_486 = 486
Public Const PROCESSOR_INTEL_PENTIUM = 586
Public Const PROCESSOR_MIPS_R4000 = 4000
Public Const PROCESSOR_ALPHA_21064 = 21064
---------------------------------------------------------------------------------------------------------------------------------------------
Mostrar un fichero AVI a pantalla completa:

Crear un formulario y escribir:
Private Declare Function mciSendString Lib
"winmm.dll" Alias "mciSendStringA"
(ByVal lpstrCommand As String,
ByVal lpstrReturnString As Any,
ByVal uReturnLength As Long,
ByVal hwndCallback As Long) As Long

Private Sub Form_Load()
CmdStr$ = "play e:\media\avi\nombre.avi fullscreen"
ReturnVal& = mciSendString(CmdStr$, 0&, 0, 0&)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Crear un link con un programa añadiéndolo al grupo de programas situado en

Inicio -> Programas o Start -> Programs:

Crear un formulario y escribir:
Private Declare Function fCreateShellLink
Lib "STKIT432.DLL" (ByVal lpstrFolderName
As String, ByVal lpstrLinkName As String,
ByVal lpstrLinkPath As String,
ByVal lpstrLinkArgs As String) As Long

Private Sub Form_Load()
iLong = fCreateShellLink("",
"Visual Basic", "C:\Archivos de Programa\DevStudio\Vb\vb5.exe", "")
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Apagar el equipo, reiniciar Windows, reiniciar el Sistema:


Añadir tres botones a un formulario y escribir lo siguiente en el código del formulario:
Private Declare Function ExitWindowsEx& Lib "user32" (ByVal
uFlags&, ByVal dwReserved&)

Private Sub Command1_Click()
Dim i as integer
i = ExitWindowsEx(1, 0&) 'Apaga el equipo
End Sub

Private Sub Command2_Click()
Dim i as integer
i = ExitWindowsEx(0, 0&) 'Reinicia Windows con nuevo usuario
End Sub

Private Sub Command3_Click()
Dim i as integer
i = ExitWindowsEx(2, 0&) 'Reinicia el Sistema
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Borrar un fichero y enviarlo a la papelera de reciclaje:

rear un formulario y escribir el siguiente código:
Private Type SHFILEOPSTRUCT
hWnd As Long
wFunc As Long
pFrom As String
pTo As String
fFlags As Integer
fAnyOperationsAborted As Boolean
hNameMappings As Long
lpszProgressTitle As String
End Type

Private Declare Function SHFileOperation Lib "shell32.dll" Alias
"SHFileOperationA" (lpFileOp As SHFILEOPSTRUCT) As Long

Private Const FO_DELETE = &H3
Private Const FOF_ALLOWUNDO = &H40

Public Sub PapeleraDeReciclaje(ByVal Fichero As String)
Dim SHFileOp As SHFILEOPSTRUCT
Dim RetVal As Long
With SHFileOp
.wFunc = FO_DELETE
.pFrom = FileName
.fFlags = FOF_ALLOWUNDO
End With
RetVal = SHFileOperation(SHFileOp)
End Sub

Private Sub Form_Load()
Recycle "c:\a.txt"
End Sub
El programa preguntará si deseamos o no eliminar el fichero y enviarlo a la papelera de reciclaje.

El parámetro .fFlags nos permitirá recuperar el fichero de la papelera si lo deseamos

Si eliminamos esta línea, el fichero no podrá ser recuperado.

---------------------------------------------------------------------------------------------------------------------------------------------
Abrir el Acceso telefónico a Redes de Windows y ejecutar una conexión:

Crear un formulario y escribir el siguiente código:
Private Sub Form_Load()
Dim AbrirConexion As Long
AbrirConexion = Shell("rundll32.exe rnaui.dll,RnaDial " &
"ConexiónInternet", 1)
SendKeys "{ENTER}"
End Sub

Para Windows 2000/NT

V_ID_CONEXION = Shell ("rasphone.exe -d " & V_NOMBRE_DE_LA_CONEXION_DIAL-UP, 1)
---------------------------------------------------------------------------------------------------------------------------------------------
Situar una ScroolBar horizontal en un ListBox:

Crear un formulario y escribir el siguiente código:
Private Declare Function SendMessage Lib "user32" Alias
"SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long,
ByVal wParam As Long, lParam As Any) As Long

Private Sub Form_Load()
Dim x As Integer, i As Integer
For i = 1 To 20
List1.AddItem "El número final de la selección es el " & i
Next i
x = SendMessage(List1.hwnd, &H194, 200, ByVal 0&)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Obtener el nombre de usuario y de la compañia de Windows:

Crear un formulario, añadir dos etiquetas o labels y escribir el siguiente código:

Private Declare Function RegQueryValueEx Lib "advapi32.dll" Alias 
"RegQueryValueExA" (ByVal hKey As Long, ByVal lpValueName As String, 
ByVal lpReserved As Long, lpType As Long, lpData As Any, 
lpcbData As Long) As Long
Private Declare Function RegOpenKey Lib "advapi32.dll" Alias 
"RegOpenKeyA" (ByVal hKey As Long, ByVal lpSubKey As String, 
phkResult As Long) As Long
Private Declare Function RegCloseKey Lib "advapi32.dll" 
(ByVal hKey As Long) As Long

Private Sub Form_Load()
    Dim strUser As String
    Dim strOrg As String
    Dim lngLen As Long
    Dim lngType As Long
    Dim hKey As Long
    Dim x As Long
    Const HKEY_LOCAL_MACHINE = &H80000002
    Const REG_SZ = &H1
    x = RegOpenKey(HKEY_LOCAL_MACHINE, 
"Software\Microsoft\Windows\CurrentVersion", 
hKey) ' open desired key in registry
    strUser = Space$(256)
    lngLen = Len(strUser)
    x = RegQueryValueEx(hKey, "RegisteredOwner", 
0, lngType, ByVal strUser, lngLen)
    If x = 0 And lngType = REG_SZ And lngLen > 1 Then
        strUser = Left$(strUser, lngLen - 1)
    Else
        strUser = "Unknown"
    End If
    strOrg = Space$(256)
    lngLen = Len(strOrg)
    x = RegQueryValueEx(hKey, "RegisteredOrganization", 0, lngType, 
ByVal strOrg, lngLen)
    If x = 0 And lngType = REG_SZ And lngLen > 1 Then
        strOrg = Left$(strOrg, lngLen - 1)
    Else
        strOrg = "Unknown"
    End If
    Label1.Caption = "Usuario: " & strUser
    Label2.Caption = "Empresa: " & strOrg
    x = RegCloseKey(hKey)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Forzar a un TextBox para que admita únicamente números:


Crear un formulario, añadir un TextBox y escribir el siguiente código:

Sub Text1_Keypress(KeyAscii As Integer)
    If KeyAscii <> Asc("9") Then
    'KeyAscii = 8 es el retroceso o BackSpace
       If KeyAscii <> 8 Then
           KeyAscii = 0
       End If
    End If
End Sub
Nuevo:
Private Sub Text1_Keypress(KeyAscii As Integer)
If Not IsNumeric(Chr$(KeyAscii)) And KeyAscii <> 8 Then KeyAscii = 0
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Forzar a un InputBox para que admita únicamente números:


Crear un formulario y escribir el siguiente código:

Private Sub Form_Load()
    Dim Numero As String
    Do
        Numero = InputBox("Introduzca un numero:")
    Loop Until IsNumeric(Numero)
    MsgBox "El numero es el " & Numero
    Unload Me
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Hacer Drag & Drop de un control (ejemplo de un PictureBox):


En un formulario, añadir un PictureBox con una imagen cualquiera y escribir el siguiente código:

Private DragX As Integer
Private DragY As Integer

Sub Form_DragDrop(Source As Control, X As Single, Y As Single)
    Source.Move (X - DragX), (Y - DragY)
End Sub

Private Sub Picture1_MouseDown(Button As Integer, Shift As Integer, 
X As Single, Y As Single)
    'Si el boton del raton es el derecho, no hacemos nada
    If Button = 2 Then Exit Sub
    Picture1.Drag 1
    DragX = X
    DragY = Y
End Sub

Private Sub Picture1_MouseUp(Button As Integer, Shift As Integer, 
X As Single, Y As Single)
    Picture1.Drag 2
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Centrar una ventana en Visual Basic:

Usar:
Move (Screen.Width - Width) \ 2, (Screen.Height - Height) \ 2
En vez de:
Form1.Left = Screen.Width - Width \ 2
Form1.Top = Screen.Height - Height \ 2
---------------------------------------------------------------------------------------------------------------------------------------------
Ejecuta pausas durante un determinado espacio de tiempo en segundos:


Llamada: Espera(5)
Sub Espera(Segundos As Single)
  Dim ComienzoSeg As Single
  Dim FinSeg As Single
  ComienzoSeg = Timer
  FinSeg = ComienzoSeg + Segundos
  Do While FinSeg > Timer
      DoEvents
      If ComienzoSeg > Timer Then
          FinSeg = FinSeg - 24 * 60 * 60
      End If
  Loop 
End Sub
Llamada: pause segundos
Sub Pause(interval)
Dim atime
atime = Timer
Do While Timer - atime < Val(interval)
DoEvents
Loop
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Editor de texto:


Seleccionar todo el texto:
Text1.SetFocus
    Text1.SelStart = 0
    Text1.SelLength = Len(Text1.Text)
Copiar texto:
Clipboard.Clear
    Clipboard.SetText Text1.SelText
    Text1.SetFocus
Pegar texto:
Text1.SelText = Clipboard.GetText()
    Text1.SetFocus
Cortar texto:
Clipboard.SetText Text1.SelText
    Text1.SelText = ""
    Text1.SetFocus
Deshacer texto: (Nota: esta operación sólo es eficaz con el control Rich TextBox).

En un módulo copie esta línea:
Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal _
hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Long) As Long
Esta es la instrucción de la función deshacer:
UndoResultado = SendMessage(Text1.hwnd, &HC7, 0&, 0&)
    If UndoResultado = -1 Then
        Beep
        MsgBox "Error al intentar recuperar.", 20, "Deshacer texto"
    End If

Seleccionar todo el texto:
SendKeys "^A"
Copiar texto:
SendKeys "^C"

Pegar texto:
SendKeys "^V"
Cortar texto:
SendKeys "^X"
Deshacer texto:
SendKeys "^Z"
---------------------------------------------------------------------------------------------------------------------------------------------
Obtener el directorio de Windows y el directorio de Sistema:

En un módulo copiar estas líneas:
Declare Function GetSystemDirectory Lib "kernel32" Alias "GetSystemDirectoryA"_
 (ByVal lpBuffer As String, ByVal nSize As Long) As Long
Declare Function GetWindowsDirectory Lib "kernel32" Alias "GetWindowsDirectoryA"_
 (ByVal lpBuffer As String, ByVal nSize As Long) As Long
Ponga dos Labels o etiquetas y un botón en el formulario:
Label1, Label2, Command1
Hacer doble click sobre el botón y escribir el código siguiente:
Private Sub Command1_Click()
    Dim Car As String * 128
    Dim Longitud, Es As Integer
    Dim Camino As String
    
    Longitud = 128
    
    Es = GetWindowsDirectory(Car, Longitud)
    Camino = RTrim$(LCase$(Left$(Car, Es)))
    Label1.Caption = Camino
    
    Es = GetSystemDirectory(Car, Longitud)
    Camino = RTrim$(LCase$(Left$(Car, Es)))
    Label2.Caption = Camino

End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Ocultar la barra de tareas en Windows 95 y/o Windows NT:

En un módulo copiar estas líneas:
Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName_
 As String, ByVal lpWindowName As String) As Long
Declare Function SetWindowPos Lib "user32" (ByVal hwnd As Long, ByVal hWndInsertAfter
As Long, ByVal x As Long, ByVal y As Long, ByVal cx As Long, ByVal cy As Long,_
ByVal wFlags As Long) As Long
Global Ventana As Long
Global Const Muestra = &H40
Global Const Oculta = &H80
En un formulario ponga dos botones y escriba el código correspondiente
a cada uno de ellos:
'Oculta la barra de tareas
Private Sub Command1_Click()
    Ventana = FindWindow("Shell_traywnd", "")
    Call SetWindowPos(Ventana, 0, 0, 0, 0, 0, Oculta)
End Sub

'Muestra la barra de tareas
Private Sub Command2_Click()
    Call SetWindowPos(Ventana, 0, 0, 0, 0, 0, Muestra)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Imprimir el contenido de un TextBox en líneas de X caracteres:

Añadir un TextBox con las propiedades "Multiline=True" y "ScrollBars=Vertical",
y un CommandButton. Hacer doble click sobre él y escribir este código:
Private Sub Command1_Click()
    'X es 60 en este ejmplo
    imprimeLineas Text1, 60
End Sub
En las declaraciones "Generales" del formulario, escribimos:
Public Sub imprimeLineas(Texto As Object, Linea As Integer)
    Dim Bloque As String
    'Numero de caracteres = NumC
    'Numero de Bloques = NumB
    Dim NumC, NumB As Integer
    NumC = Len(Texto.Text)
    If NumC > Linea Then
        NumB = NumC \ Linea
        For I = 0 To NumB
            Texto.SelStart = (Linea * I)
            Texto.SelLength = Linea
            Bloque = Texto.SelText
            Printer.Print Bloque
        Next I
    Else
        Printer.Print Texto.Text
    End If
    Printer.EndDoc
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Leer y escribir un fichero Ini:

Declaraciones generales en un módulo:
Declare Function GetPrivateProfileString Lib "kernel32" Alias "GetPrivateProfileStringA"_
(ByVal lpApplicationName As String, ByVal lpKeyName As Any, ByVal lpDefault As_
String ByVal lpReturnedString As String, ByVal nSize As Long, ByVal lpFileName As_
String) As Long
Declare Function WritePrivateProfileString Lib "kernel32" Alias_
"WritePrivateProfileStringA" (ByVal lpApplicationName As String, ByVal lpKeyName As_
Any, ByVal lpString As Any, ByVal lpFileName As String) As Long
Leer en "Ejemplo.Ini":
Private Sub Form_Load()
    Dim I As Integer
    Dim Est As String
    Est = String$(50, " ")
    I = GetPrivateProfileString("Ejemplo", "Nombre", "", Est, Len(Est), "Ejemplo.ini")
    If I > 0 Then
        MsgBox "Tu Nombre es: " & Est
    End If
End Sub
Escribir en "Prueba.Ini":
Private Sub Form_Unload(Cancel As Integer)
    Dim I As Integer
    Dim Est As String
    Est = "Ejemplo - Apartado"
    I = WritePrivateProfileString("Ejemplo", "Nombre", Est, "Ejemplo.ini")
End Sub
(Nota: si I=0 quiere decir que no existe Información en la línea de fichero Ini a la
que hacemos referencia. El fichero "Ejemplo.Ini" se creará automáticamente).

---------------------------------------------------------------------------------------------------------------------------------------------
Crear una barra de estado sin utilizar controles OCX o VBX:

Crear una PictureBox y una HScrollBar:

Propiedades de la HScrollBar:
Max -> 100
Min -> 0
Propiedades de la PictureBox:
DrawMode -> 14 - Merge Pen Not
FillColor -> &H00C00000&
Font -> Verdana, Tahoma, Arial; Negrita; 10
ForeColor -> &H00000000&
ScaleHeight -> 10
ScaleMode -> 0 - User
ScaleWidth -> 100
Insertar en el formulario o módulo el código de la función:
Sub Barra(Tam As Integer)
    If Tam > 100 Or Tam <>
Insertar en el evento Change del control HScrollBar:
Private Sub HScroll1_Change()
    Barra (HScroll1.Value)
End Sub
En el evento Paint del formulario, escribir:
Private Sub Form_Paint()
    Barra (HScroll1.Value)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular el espacio total y espacio libre de una Unidad de disco:

Crear un módulo y escribir:
Declare Function GetDiskFreeSpace Lib "kernel32" Alias "GetDiskFreeSpaceA"_
(ByVal lpRootPathName As String, lpSectorsPerCluster As Long, lpBytesPerSector_
As Long, lpNumberOfFreeClusters As Long, lpTtoalNumberOfClusters As Long) As Long
Crear 7 Labels:

Escribir el código siguiente:
Private Sub Form_Load()
    Dim I1 As Long
    Dim I2 As Long
    Dim I3 As Long
    Dim I4 As Long
    Dim Unidad As String
    Unidad = "C:/"
    GetDiskFreeSpace Unidad, I1, I2, I3, I4
    Label1.Caption = Unidad
    Label2.Caption = I1 & " Sectores por cluster"
    Label3.Caption = I2 & " Bytes por sector"
    Label4.Caption = I3 & " Número de clusters libres"
    Label5.Caption = I4 & " Número total de clusters"
    Label6.Caption = "Espacio total en disco: " & (I1 * I2 * I4)
    Label7.Caption = "Espacio libre en disco: " & (I1 * I2 * I3)
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Crear un efecto Shade al estilo de los programas de instalación:

Crear un proyecto nuevo y escribir el código siguiente:
Private Sub Form_Resize()
    Form1.Cls
    Form1.AutoRedraw = True
    Form1.DrawStyle = 6
    Form1.DrawMode = 13
    Form1.DrawWidth = 2
    Form1.ScaleMode = 3
    Form1.ScaleHeight = (256 * 2)
    For i = 0 To 255
       Form1.Line (0, Y)-(Form1.Width, Y + 2), RGB(0, 0, i), BF
       Y = Y + 2
    Next i
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Situar el cursor encima de un determinado control (p. ej.: un botón):

Escribir el código siguiente en el módulo:
Declare Sub SetCursorPos Lib "User32" (ByVal X As Integer, ByVal Y As Integer)
Insertar un botón en el formulario y escribir el siguiente código:
Private Sub Form_Load()
     X% = (Form1.Left + Command1.Left + Command1.Width / 2 + 60) / Screen.TwipsPerPixelX
     Y% = (Form1.Top + Command1.Top + Command1.Height / 2 + 360) / Screen.TwipsPerPixelY
     SetCursorPos X%, Y%
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Menú PopUp en un TextBox:

Ejemplo para no visualizar el menú PopUp implícito de Windows:

En el evento MouseDown del control TextBox escriba:
Private Sub Editor1_MouseDown(Button As Integer, Shift As Integer, x As Single, Y As Single)
    If Button = 2 Then
        Editor1.Enabled = False
        PopupMenu MiMenu
        Editor1.Enabled = True
        Editor1.SetFocus
    End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Hacer sonar un fichero Wav o Midi:

Insertar el siguiente código en un módulo:
Declare Function mciExecute Lib "winmm.dll" (ByVal lpstrCommand As String) As Long
Insertar un botón en el formulario y escribir el siguiente código:
Private Sub Command1_Click()
    iResult = mciExecute("Play c:\windows\ringin.wav")
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Hacer un formulario flotante al estilo de Visual Basic:

Crear un nuevo proyecto, insertar un botón al formulario que inserte un formulario más y un módulo.
Pegue el siguiente código en el

módulo:
Declare Function SetParent Lib "user32" (ByVal hWndChild As Long, ByVal hWndNewParent As Long) As Long
Pegar el siguiente código en el formulario principal:
Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer)
    Unload Form2
End Sub

Private Sub Command1_Click()
   Dim ret As Integer
   If doshow = False Then 
   ret = SetParent(Form2.hWnd, Form1.hWnd) 
   Form2.Left = 0 
   Form2.Top = 0
   Form2.Show 
   doshow = True
      Else
         Form2.Hide
     doshow = False
   End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Comprobar si el programa ya está en ejecución:

Crear un nuevo proyecto e insertar el siguiente código:
Private Sub Form_Load()
    If App.PrevInstance Then
        Msg = App.EXEName & ".EXE" & " ya está en ejecución"
        MsgBox Msg, 16, "Aplicación."
        End
    End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Hallar el nombre del PC en Windows 95 o Windows NT:

Cree un nuevo proyecto e inserte dos ButtonClick y un Módulo:

Pegue el siguiente código en el formulario:
Private Sub Command1_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
    Dim nPC as String
    Dim buffer As String
    Dim estado As Long
    buffer = String$(255, " ")
    estado = GetComputerName(buffer, 255)
    If estado <> 0 Then
        nPC = Left(buffer, 255)
    End If
    MsgBox "Nombre del PC: " & nPC
End Sub

Private Sub Command2_Click()
    Unload Form1
End Sub
Pegue el siguiente código en el módulo:
Declare Function GetComputerName Lib "kernel32" Alias "GetComputerNameA"
 (ByVal lpBuffer As String, nSize As Long) As Long
---------------------------------------------------------------------------------------------------------------------------------------------
Eliminar el sonido "Beep" cuando pulsamos Enter en un TextBox:

Crear un nuevo proyecto e insertar un TextBox:

Pegar el siguiente código en el formulario:
Private Sub Text1_KeyPress(KeyAscii As Integer)
    If KeyAscii = 13 Or KeyAscii = 9 Then KeyAscii = 0
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Ocultar y mostrar el puntero del ratón:

Crear un nuevo proyecto e insertar dos ButtonClick y un Módulo:

Pegue el siguiente código en el formulario:
Private Sub Command1_Click()
    result = ShowCursor(False)
End Sub

Private Sub Command2_Click()
    result = ShowCursor(True)
End Sub
Usar las teclas alternativas Alt+O para ocultarlo y Alt+M para mostrarlo.

Peguar el siguiente código en el módulo:
Declare Function ShowCursor Lib "user32" (ByVal bShow As Long) As Long
---------------------------------------------------------------------------------------------------------------------------------------------
Calcular el número de serie de un disco:

Crear un nuevo proyecto e insertar el siguiente código en el formulario:
Private Declare Function GetVolumeInformation& Lib "kernel32" Alias "GetVolumeInformationA"
(ByVal lpRootPathName As String, ByVal pVolumeNameBuffer As String, ByVal nVolumeNameSize
As Long, lpVolumeSerialNumber As Long, lpMaximumComponentLength As Long, lpFileSystemFlags
As Long, ByVal lpFileSystemNameBuffer As String, ByVal nFileSystemNameSize As Long)

Private Sub Form_Load()
    Dim cad1 As String * 256
    Dim cad2 As String * 256
    Dim numSerie As Long
    Dim longitud As Long
    Dim flag As Long
    unidad = "C:\"
    Call GetVolumeInformation(unidad, cad1, 256, numSerie, longitud, flag, cad2, 256)
    MsgBox "Numero de Serie de la unidad " & unidad & " = " & numSerie
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Ejemplo de un mailer en base64.

Private Sub Base64_Click()
   Dim Caracter As String * 1
   Dim Trio(3) As Integer
   Dim Cont As Integer
   Dim ContLinea As Integer
   Dim Cuatro(4) As Integer
   Dim Base64 As String

Base64 = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"

ContLinea = 0
MensajeSaliente = ""
MensajeEntrante = ""
If Cfg.FicheroAnexo <> "" Then
Open NFich For Binary As #3 Len = 3
Cont = 0
ContTotal = 0
Progreso.Max = FileLen(NFich)
While Not ContTotal = LOF(3)
ContTotal = ContTotal + 1
Caracter = Input(1, 3)
Cont = Cont + 1
Trio(Cont) = Asc(Caracter)
'MensajeSaliente = MensajeSaliente + Caracter
If Cont = 3 Then
Cuatro(1) = Int(Trio(1) / 4)
Cuatro(2) = (Trio(1) - Int(Trio(1) / 4) * 4) * 16 + Int(Trio(2) / 16)
Cuatro(3) = (Trio(2) - (Int(Trio(2) / 16) * 16)) * 4 + Int(Trio(3) / 64)
Cuatro(4) = Trio(3) - Int(Trio(3) / 64) * 64
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(1) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(2) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(3) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(4) + 1, 1)
Cont = 0
ContLinea = ContLinea + 4
If ContLinea = 76 Then
MensajeEntrante = MensajeEntrante + vbCrLf
ContLinea = 0
End If
End If
DoEvents
Wend
Select Case Cont
Case 1
Cuatro(1) = Int(Trio(1) / 4)
Cuatro(2) = (Trio(1) - Int(Trio(1) / 4) * 4) * 16
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(1) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(2) + 1, 1) + "=="
Case 2
Cuatro(1) = Int(Trio(1) / 4)
Cuatro(2) = (Trio(1) - Int(Trio(1) / 4) * 4) * 16 + Int(Trio(2) / 16)
Cuatro(3) = (Trio(2) - (Int(Trio(2) / 16) * 16)) * 4
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(1) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(2) + 1, 1)
MensajeEntrante = MensajeEntrante + Mid(Base64, Cuatro(3) + 1, 1) + "="
End Select
Close #3
End If
End Sub
---------------------------------------------------------------------------------------------------------------------------------------------
Lo que ves, depende de la teoria que utilices para interpretarlo
Seleccionar todo un procedimiento
Para seleccionar un procedimiento completo (ya sea para borrarlo o para copiarlo a otro formulario) abrimos la pantalla de edición correspondiente y luego hacemos un doble clic en la parte izquierda de la misma (donde el cursor cambia a una flecha apuntando hacia la derecha).

---------------------------------------------------------------------------------------------------------------------------------------------
Cambiar rápidamente la propiedad Enabled

La propiedad Enabled de un objeto se puede alternar fácilmente con una única línea de código:
optAlternar.Enabled = NOT optAlternar.Enabled
Este código es independiente de la definición de True y False, la cual varía según la versión de VB utilizada. Ya sea que se represente numéricamente (-1 = True; 0 = False) o lógicamente, la operación NOT se adapta para dar el resultado correcto.

---------------------------------------------------------------------------------------------------------------------------------------------
Date y Date$ no son equivalentes

La función Date$ devuelve la fecha del sistema en un string con el formato MM-DD-AAAA. Date devuelve un variant con el formato de fecha especificado en el Panel de Control (puede devolver, por ejemplo, DD-MM-AA). Si queremos realizar cálculos con fechas, debemos utilizar Date$. Para mostrar la fecha actual al usuario, basta con usar Date (sin el símbolo $).

---------------------------------------------------------------------------------------------------------------------------------------------
"Couldn't find installable ISAM"

En una aplicación que accede a bases de datos, este error indica que VB no encuentra Información sobre los archivos de acceso a bases de datos. Debemos crear un archivo en la carpeta de Windows con esa Información: copiar el archivo Vb.INI a dicha subcarpeta, con el nombre de la aplicación ejecutable y la extensión INI (por ejemplo, Agenda.INI).

---------------------------------------------------------------------------------------------------------------------------------------------
Evitar la carga de complementos

Al cargar VB 4 o 5, cualquier complemento (Add-In) activo también se ejecuta. Si hay un error en algún complemento, puede ocurrir un GPF (falla de protección general). Para evitar esto, apagar los complementos antes de cargar VB, editando el archivo VBAddin.INI (en la carpeta de Windows), poniendo un 0 al lado de cada complemento. Por ejemplo: AppWizard.Wizard=0.

---------------------------------------------------------------------------------------------------------------------------------------------
Pasar cadenas de caracteres a una DLL

VB presenta un problema a la hora de recibir cadenas de caracteres grandes de una DLL. Se produce una sobrecarga que demora el procesamiento, aun cuando ningún resultado es devuelto. Por esta razón, en programas de tiempo crítico es necesario salvar este inconveniente pasando cadenas inicializadas con la longitud exacta que se espera recibir.

---------------------------------------------------------------------------------------------------------------------------------------------
Descargar formularios poco utilizados

Hay que tener en cuenta que, aunque estén ocultos, los formularios ocupan un espacio de memoria. Tener en memoria un formulario con muchos controles que se usará una sola vez no resulta una muy buena idea, o sea que no es conveniente ocultarlo. En tal caso, conviene descargarlo después de usado.

---------------------------------------------------------------------------------------------------------------------------------------------
Evitar el uso de las propiedades por defecto

Si bien las propiedades por defecto muchas veces nos ahorran tipear unos cuantos caracteres demás, no siempre es bueno confiar en ellas. Por ejemplo, algunas propiedades por defecto cambiaron de Visual Basic 3 a la versión 4, causando "cuelgues" inexplicables. Aunque es un poco más trabajoso, conviene utilizar todas las propiedades explícitamente.

---------------------------------------------------------------------------------------------------------------------------------------------
Comentar e indentar el código

Realizar comentarios acerca de cómo funciona una rutina, e indentar el código de la misma para que sea más fácil de leer, son dos acciones que debemos realizar siempre al programar. Un simple renglón aclaratorio puede ahorrar horas de prueba y error el día de mañana. Indentar significa poner cada ciclo repetitivo hacia la derecha, para lo cual basta una presión de la tecla [TAB].

---------------------------------------------------------------------------------------------------------------------------------------------
Grabar antes de ejecutar

Es una buena costumbre de programación el grabar los programas antes de ejecutarlos. Esto es especialmente recomendado en el caso de usar alguna función API, puesto que una mala definición de la misma, o el paso incorrecto de algún argumento, pueden causar un GPF (Error de protección general) en Visual Basic, e incluso en el mismo Windows.

---------------------------------------------------------------------------------------------------------------------------------------------
Seleccionar varios controles

Para setear un grupo de propiedades en varios controles, podemos acelerar el trabajo seleccionándolos a todos y seteando las propiedades una sola vez. Para ello se "dibuja" un rectángulo que contenga a todos los controles a seleccionar. Automáticamente, VB mostrará en la ventana de propiedades sólo las que son comunes a todos los controles seleccionados, pudiendo setearlas en conjunto.

---------------------------------------------------------------------------------------------------------------------------------------------
Borrar las variables objeto

Al terminar de usar una variable que contiene un objeto (por ejemplo, una variable definida As Database) conviene setear su valor a Nothing. Esto libera la memoria ocupada por dicha variable, lo que no siempre ocurre al cerrar el objeto. Por ejemplo:
[b]Dim DB As Database
' Abro la base
Set DB = OpenDatabase ("C:\VB\BIBLIO.MDB")
...
' Cierro
DB.Close
' Libero la memoria
Set DB = Nothing[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
Evitar el "beep" del [ENTER]

Muchas veces, cuando se ingresa Información en una caja de texto y se presiona la tecla [ENTER], se escucha un "beep". Para evitar esto, colocar el código siguiente en el evento
[b]KeyPress de la caja de texto:
If KeyAscii = Asc(vbCR) Then

KeyAscii = 0
End If[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
TextBox de sólo lectura

Para hacer que un TextBox sea de sólo lectura, podemos setear su propiedad Enabled a False. Sin embargo, esto le da un feo color gris que habitualmente dificulta. Otra manera de hacerlo, más elegante, es incluir el siguiente código en el evento KeyPress de dicho control (el cual no impide que el usuario coloque el cursor sobre él):
[b]KeyAscii = 0[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
Error al utilizar SetFocus

Si utilizamos el método SetFocus sobre un control o formulario que no está visible o habilitado (propiedad Enabled), Visual Basic puede llegar a colgar nuestra aplicación, si es que no se utiliza control de errores. Antes de usar este método, hay que asegurarse que el control esté visible y habilitado.

---------------------------------------------------------------------------------------------------------------------------------------------
La excepción que confirma la regla

Si bien el truco del SetFocus funciona casi siempre, hay una excepción muy importante, constituida por los métodos gráficos (Print, Line, Circle y PSet). Al llamar a estos métodos no puede usarse la estructura With ... End With, debiéndose anteponer el objeto a dichos métodos, aun dentro de dicha estructura. Un ejemplo sería:
[b]With Picture

.Move 0, 0

Picture.Print "Hola, Mundo!"
End UIT[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
Evitar cadenas nulas en campos de Access
Si se utiliza una base de datos de Access, los campos alfanuméricos contienen valor NULL hasta tanto se les asigne algún valor (aunque sea una cadena vacía). Si se lee un campo con valor NULL de un RecordSet, asignando su valor a una variable de tipo cadena, se produce un error de ejecución. Para evitar esto, se concatena una cadena vacía a cada campo en cuanto se lo lee.

---------------------------------------------------------------------------------------------------------------------------------------------
Usar Sleep en lugar de DoEvents
En un programa que se ejecuta en Windows 95 o Windows NT, es conveniente usar la función API Sleep. DoEvents pierde parte de su tiempo procesando mensajes del mismo proceso, lo que en un entorno multitarea es innecesario. La declaración de la función es:
Public Declare Sub Sleep Lib "KERNEL32" Alias Sleep (ByVal Milisegundos As Long)
Y se usa de la siguiente manera:
Sleep 0&

---------------------------------------------------------------------------------------------------------------------------------------------
Error al cambiar el tamaño de los formularios
Si intentamos cambiar el tamaño de un formulario mientras está minimizado, obtendremos un error. Para evitar esto, ay que chequear antes todo el estado del formulario. Esto se logra con el siguiente fragmento de código:
[b]If Me.WindowState <> 1 Then[/b]




[b]' NO estoy minimizado
' El código para mover o cambiar el tamaño del formulario va aqui.
End If[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
No genera eventos al mostrar un MessageBox

Mientras un programa se encuentra mostrando un cuadro de mensaje en la pantalla (generado con la instrucción MsgBox) no admite que se produzca ningún evento. Esto es para prevenir la ejecución de código que podría causar problemas, ya que un mensaje de este tipo sólo debería aparecer en contadas ocasiones.

---------------------------------------------------------------------------------------------------------------------------------------------
Cantidad de Bytes que Ocupa un Directorio
[b]Sub Form_Load()

     Dim FileName As String

     Dim FileSize As Currency

     Dim Directory As String

     Directory = "c:\windows\"

     FileName = Dir$(Directory & "*.*")

     FileSize = 0

 

     Do While FileName <> ""

            FileSize = FileSize + FileLen(Directory & FileName)

            FileName = Dir$

     Loop

 

     Text1.Text = "Este directorio ocupa la cantidad de bytes = " + Str$(FileSize)

End Sub[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
Entrar en las Propiedades de Accesibilidad

1. Crear un nuevo formulario, Form1 por defecto
2. Añadir un boton al formulario "Command Button control"
3. Añadir el siguiente codigo a la propieded Clik del boton.
[b]Private Sub Command1_Click()
X = Shell("Rundll32.exe shell32.dll,Control_RunDLL main.cpl @2")
End Sub[/b]
---------------------------------------------------------------------------------------------------------------------------------------------
Espero les alla servido

Estuve 1 hora o mas poniendolo lindo :P

Saludos!

PD: Algun mod/admin me borra este post que era el viejo http://www.indetectables.net/foro/viewt ... 14&t=12794 ya que este lo edite y lo deje mas entendible
Lo que ves, depende de la teoria que utilices para interpretarlo
Se agradece el tiempo que dedicastes en postear esto

Para los nuevos os recomiendo estas :

"Como obtener el directorio desde donde estamos ejecutando nuestro programa"
"Determinar si un fichero existe o no"

hay mas pero estas sirven de mucho solo aprendanlas a usar y uses su inmaginacion

Saludos
¿Si usted muriera hoy esta seguro que iría al cielo?
http://www.antesdelfin.com/salvo.html

© Indetectables Team
esto si que me funcionó al 100%.....en mi proyecto.....asi que te doy las gracias
br0s...


PD: solo me falta EOFdata en mi proyecto...y espero una mano amiga....
ddiioosss muxisimo mejor q el anterior asi qeda mejor. Lo que me qeda aora es bajarme la pagina para mirarlo hasta sin internet

Para lso novatos (como yo) esto nos viene de lujo muxas graciassss
En 1º en 2º o en 3º BETICO hasta que muera

Pido a los administradores a poner de relieve el puesto a su disposición siempre
excelente trabajo!
enjoy
by
Kerberos5 Alias 4sp1d3
My Web Site http://www.sendmailer.altervista.org/
# Niqito-. te lo has currado recopilando todos estos scripts...

Está genial!
Muchas gracias por la recopilación!
Imagen

"Be the change you want to see in the world"
Muchas gracias # Niqito-. , se ve muy bueno..
saludos
-Aprovechemos mientras Windows es vulnerable.
-No hagas a otros lo que no te gustaría que hagan con.... tu mamá.
-El mejor Snifer es tu propio ISP.
Ya habia visto el post pero weno...

Muy bueno.... Que malo que lo allas copiado de otra web y haora digas que e llevo 1 hr hacerlo

Quieres el link?

no creo...
" -Solo hay dos cosas que odio:
El racismo y el negro de acá a la vuelta. "

LoqBuster
Esto es de la web : [Enlace externo eliminado para invitados]

De todos modos gracias pero nose de donde sacaste lo de la hora ... con solo copiar y pegar hubiera bastado .
H3x@ escribió:Esto es de la web : [Enlace externo eliminado para invitados]

De todos modos gracias pero nose de donde sacaste lo de la hora ... con solo copiar y pegar hubiera bastado .
EXACTO


" -Solo hay dos cosas que odio:
El racismo y el negro de acá a la vuelta. "

LoqBuster
LoqBuster escribió:Ya habia visto el post pero weno...

Muy bueno.... Que malo que lo allas copiado de otra web y haora digas que e llevo 1 hr hacerlo

Quieres el link?

no creo...
emmm lo habia posteado antes y me dijieron que taba desprolijo ademas que no se entendia.. tonces me digne a ordenarlo... si ubiese esto echo yo me llevaria mas que una hora... nunca mencione que lo ise yo ¬¬
Lo que ves, depende de la teoria que utilices para interpretarlo
Responder

Volver a “Manuales”